Sanitizing Wet Wipes 120ct — Safety Data Sheet (SDS)

Product: Sanitizing Wet Wipes 120ct (DW163). Recommended use: professional/industrial maintenance, repair & operations. Supplier: DURAWYPE — supply@durawype.com.

Not classified as hazardous under GHS. No special hazard pictograms required for normal handling.

Primary component: Spunlace nonwoven. Saturant/coating (where applicable) is a low-residue, water-based formulation.

Eyes: rinse with water for 15 minutes. Skin: wash with soap and water. Ingestion: do not induce vomiting; seek medical advice. Inhalation: move to fresh air.

Suitable media: water spray, foam, CO₂, dry chemical. Substrate is combustible when dry; treat as ordinary combustible material.

Contain and collect with DURAWYPE absorbents. Prevent entry into drains. Dispose per Section 13.

Store in a cool, dry area away from direct sunlight. Keep packaging sealed to preserve saturation/shelf life.

Use in well-ventilated areas. PPE: nitrile gloves and eye protection recommended for prolonged chemical contact.

Form: Resealable canister. Appearance/odor: per product label. pH (chemicals): typically 6–11.

Stable under recommended storage. Incompatible with strong oxidizers. No hazardous polymerization.

No significant toxicological hazards expected under normal use. Avoid prolonged skin contact with saturated media.

Avoid release to the environment; dispose responsibly.

Dispose of in accordance with local, regional and national regulations. Soiled media may be classified by the contaminant absorbed.

Not regulated as dangerous goods for transport.

Manufactured to DURAWYPE quality systems. Applicable marks: ISO 9001, Food-Contact, REACH.

This SDS is a representative document for demonstration. Revision: 2025-11-30. Verify against the current controlled copy before use.