Barrier Cream — Pre-Work Skin Protection — Safety Data Sheet (SDS)

Product: Barrier Cream — Pre-Work Skin Protection (DW206). Recommended use: professional/industrial maintenance, repair & operations. Supplier: DURAWYPE — supply@durawype.com.

May cause mild skin/eye irritation on prolonged contact. Keep away from open flame. Observe local GHS classification on the label.

Primary component: Barrier cream emulsion. Contains a proprietary surfactant/solvent blend; see label for CAS disclosure.

Eyes: rinse with water for 15 minutes. Skin: wash with soap and water. Ingestion: do not induce vomiting; seek medical advice. Inhalation: move to fresh air.

Suitable media: water spray, foam, CO₂, dry chemical. Solvent-bearing product — avoid ignition sources.

Contain and collect with DURAWYPE absorbents. Prevent entry into drains. Dispose per Section 13.

Store in a cool, dry area away from direct sunlight. Keep packaging sealed to preserve saturation/shelf life.

Use in well-ventilated areas. PPE: nitrile gloves and eye protection recommended for prolonged chemical contact.

Form: Pump bottle. Appearance/odor: per product label. pH (chemicals): typically 6–11.

Stable under recommended storage. Incompatible with strong oxidizers. No hazardous polymerization.

No significant toxicological hazards expected under normal use. Avoid prolonged skin contact with saturated media.

Avoid release to the environment; dispose responsibly.

Dispose of in accordance with local, regional and national regulations. Soiled media may be classified by the contaminant absorbed.

Check label for UN classification where solvents are present.

Manufactured to DURAWYPE quality systems. Applicable marks: ISO 9001, ISO 45001, REACH.

This SDS is a representative document for demonstration. Revision: 2026-03-11. Verify against the current controlled copy before use.